| Coaxial cable ladders allow multiple runs of coaxial cable to be mounted
to the face of an angle braced tower or other structure. The ladder is available in
galvanized 20 foot sections and must be cut to fit in the field. Each ladder consists
of angle rails that have interconnecting plates that allow multiple sections to be
spliced together. Ladder rungs are pre-punched with 7/16” holes for butterfly hangers
and 13/16” holes for snap-in hangers. Ladder rungs are available to accommodate up to
6, 9, or 12 runs of coaxial cable. The widths of each ladder section are 21”, 28” and
36” respectively. Each ladder section includes hardware necessary for attachment up to
4” x 3/8” angle braced towers. Hardware kits for other forms of attachment must be
purchased separately.
|
